1 / 2
Meshroom S - Dual 60mm Top Fans - GPU or MB config — image 1
1 / 2

Meshroom S - Dual 60mm Top Fans - GPU or MB config

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple fan mount for the Meshroom S to install up to 2 60mm fans on either the Motherboard or GPU side.

Rating
0 / 5
Likes
0
Downloads
5
Makes
0
Views
63
Reviews
0

Updated at source:

Model information

Category
Computers
License
GNU General Public License v2.0

I was looking for a fan intake or exhaust for the Meshroom S and found a model that was awfully close to what I was looking for, but it only could be mounted on the GPU side of the top of the Meshroom S. I simplified the model a bit and also made it reversible as I was looking for a fan to blow on the ram, vram, and chipset of a ITX motherboard. I am just using fan self tapping screws to hold this in place but you could heatset some screw mounts in if you'd like. The fan screws hold it plenty secure.

If you are installing this on the MB side of the case be sure to use slim 60mm fans as full length ones will not fit. It's a tight fit. I'm just using one fan in the picture here but 2 would fit. Pictured is a Noctua NF-A6x15 PWM.

I believe this will only work in the 3 slot gpu configuration but I have not confirmed this. If you want to make any modifications feel free to use the included STEP file, but both the GPU and MB side files are included below.

Printed in PETG to better survive heat and the bit of bending you have to do to fit it into place. It also is soft to take the fan screws to mount. 15% infill with 3 perimeter layers.