1 / 1
Precision steel gantry. Universal fit for all iterations of Rat Rig V-Core 3 printers — image 1

Precision steel gantry. Universal fit for all iterations of Rat Rig V-Core 3 printers

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Precision steel gantry for Rat Rig V-Core 3 printers

Rating
0 / 5
Likes
2
Downloads
12
Makes
0
Views
160
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

Only the linear rail face is machined perfectly true.

Machining all four faces would cause it to distort in difficult to manage ways.

It will work on all versions of V-Core 3 printers with both FFG and ALL other V-Core 3/3.1/3.2H,/3.5 Hybrid/FFG XY joiners.

If your XY joiners have 20 x 20 mm gantry tube holes in them, you will also need to print two 2mm shims from plastic to go between the underside of the tube and the bottom inside face of each of the XY joiners.

These should Ideally be machined from precision cold drawn 18 x 18 x 2mm steel tube.
After machining top face is 1 mm thick.

The XY mounting holes are slotted to allow thermal cycling (expansion/contraction) of the printer frame without causing binding on the gantry.

Calculated weight for the V-Core 300 length is 91 grams.

Cost won't be cheap due to the machining but advantages will be a CTE that matches the linear rail and a much truer gantry tube than could be achieved by just cutting a piece of 'precision' tube to length and drilling holes in it.

Tags