internal abxy button replacement for 8Bitdo Pro 3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement for the stock buttons of the Pro 3 to make the abxy buttons less noisy.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 10
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
This is a replacement part for the all metal stock buttons of the pro 3.
There are two versions, one is a single part and the other are two parts you need to assemble. This way you can print the first part out of TPU to make the buttons even quieter. My results vary between the sound level of a ps5 and xbox one controller.
The single version and second half were printed with a .2mm nozzle for the best accuracy and the first half was printed with a .4mm nozzle as i couldnt use a smaller nozzle with TPU.
The washers are 6mm in diameter and .5mm in height (M2.3 following german DIN 125) and made out of steel.
The version with two halves has guiding notches to assure that theyre oriented correctly, theyre very subtle but still work as intended.
The buttons are secure and wont fall or shake out but theyre held in with a bit less force than stock which is to be expected. You can pull them out by hand but only if you really want to and not by accident.