BirdFy Bath add-ons
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A riser to help seeing larger birds and a drip irrigation clip to aide in routine filling of the bath
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 4
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The riser is printed in PET-G here as it sees little sun (and is quite bulky. I used 5% infill, .16 layer height and 3 perimeters. - no support
The drip irrigation clip is printed here in ASA (for UV resistance)25% infill, 0.20 layer height, 4 perimeters. While the clip seems to hold nicely with out it, I added a 7 mm hole that, if a corresponding hole is drilled in the outer wall of the bath a standard 7mm x 16 mm automotive panel clip can be used to make the clip more secure.
The drip hose will slip smoothly, but firmly into the clip and point the water flow directly down inti the basin.