Resin Vat Thumbscrew
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A M4 Hex Cap Thumbscrew Head Uses an M4-.70 Hex Cap screw and some glue I Recommend using 45mm screws.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Public Domain
I have a second hand Anycubic Photon Mono M7 Pro. While I still can't get it to run right after fixing the reason it was broken.
I found that one of the two thumbscrews that held the Vat in place was broken. Honestly looks like a dog chewed it up. But cause of this, my first layer picks up the entire vat then drops it, messing with my prints.
All you need is a M4-.70 hex screw, I recommend you check the length of your original ones if possible, cause a google search told me 40mm but they are more realistically 45mm.