Alfa Spider P2 916 Charging Braket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D-printable charging bracket for the Alfa Spider 916 Phase 2, designed to mount in the boot behind the trim for a clean
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Open Community License v1.1
I have created a charging bracket for the Phase 2 Alfa Romeo 916 Spider. The bracket can be mounted in the boot behind the trim. It can be used with the trim removed, or if you don't mind cutting the trim, you can reuse the same handle as on the right-hand side for a factory look.
Size: 130.24 × 48.2401 × 71.6401 mm
Volume: 117,387 mm³
Triangles: 36,742
I printed it on its side for added strength, but you can experiment with different print orientations if you prefer.
I don't know if it will fit Phase 1 or Phase 3 models. My assumption is that it should fit without any issues; however, I cannot verify this.
I have uploaded two versions of the model: one with mounting anchors for the body and one without.
I used double-sided tape because I didn't want to drill holes in my car.
The dimensions of the charging ports are included in the screenshot.
If you need any adjustments or have any comments or suggestions, don't hesitate to ask.
