Winged Sandal Earrings — Hermes' talaria, flat two-colour pair
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The winged sandal of Hermes (talaria, the 'Mercury foot') as a flat two-colour dangle earring — sole, up-curled toe and
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 10
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution
The winged sandal of Hermes — talaria, the "Mercury foot" — as a flat two-colour dangle earring. Side profile: sole, up-curled toe, low upper, and an ankle strap that arcs up over the heel and closes into the bail. A feathered wing sweeps back off the heel in the second colour.
Printed and worn — the photos are the actual print in terracotta and white PLA.
What makes it work: the two colours are CO-PLANAR. Most two-colour flat charms stack colour B on top of colour A, which leaves a visible step and a seam that catches. Here the sandal and the wing tile the same outline at the same Z — the wing is clipped to the heel side of the strap line and then differenced by the sandal, so the two solids meet edge-to-edge with zero overlap. The AMS lays both down in the same layers, and the finished piece is flush on both faces: it reads as one solid 2.2 mm plate that happens to be two colours. No slivers, no floating fragments, nothing to delaminate.
Files
File | What it is |
| The mirrored L+R pair — one plate, both earrings, two named solids |
| A single earring, two named solids |
| The full parametric source |
Both STLs carry two named solids, sandal and wings. In Bambu Studio: Import → right-click the object → "Split to Parts", then assign a filament to each part. The coordinates are locked together, so never use "Add Part" — that re-arranges them.
Printing it in a single colour is also fine: import and print as-is. Because the colours are co-planar and flush, the one-colour version is exactly the same shape.
Print settings
PLA or PETG, 0.2 mm layers, 4 walls, 15 % infill (it is 2.2 mm thick — that is mostly perimeters anyway).
Flat on the bed, no supports, no brim needed. The whole model is one flat plate; the wing feathers and the bail loop are all in-plane.
The pair plate is ~85 × 20 mm; a single earring ~35 × 16 mm.
Score lines on the sole and the wing feathers are 0.5 mm deep on the top face only — they show up best with a 0.4 mm nozzle.
Finishing
The bail is a Ø2.6 mm hole in the ankle strap, sized for a standard jump ring. Open a jump ring sideways (never pull it apart), hook it through the bail and your ear wire, close it. That is the whole assembly — no glue.
Source
Designed from scratch in parametric OpenSCAD. No AI-generated geometry, no third-party libraries — the attached .scad is self-contained and is the exact file these STLs were exported from. emblem_scale resizes the whole charm (0.82 → ~35 mm), th is the plate thickness, bail_id the jump-ring hole and pair_dx the spacing of the two earrings on the plate. Setting -D 'part="sandal"' or part="wings" exports the colours as separate files if your slicer cannot split named solids; part="pair_sandal" / part="pair_wings" do the same for the pair.
Public-domain Greek-myth motif.
