1 / 4
Sculpfun S9 Air assist E3D nozzle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For my Sculpfun S9 I designed an air assist nozzle which can hold an E3D nozzle.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 181
- Makes
- 0
- Views
- 1,442
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For my Sculpfun S9 I designed an air assist nozzle which can hold an E3D nozzle. I tried an 1.0mm nozzle but positioning is rather hard so I drilled it to 1.5mm
Tube for air assist is on the side (left or right is on you). I used a copper tube to connect the hose.
The design is made so that the nozzle floats 1mm above the item to be engraved or cut. So the end of the nozzle is 19mm below the metal housing of the laser.