1 / 4
Ikea Vesken legs remix to fit on180x 180 print bed like bambulab A1 mini — image 1
1 / 4

Ikea Vesken legs remix to fit on180x 180 print bed like bambulab A1 mini

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I needed a simple height adjustment to my IKEA VESKEN unit. I first assembled several IKEA VESKEN shelves. I used four…

Rating
0 / 5
Likes
1
Downloads
5
Makes
0
Views
37
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial — Share Alike

I needed a simple height adjustment to my IKEA VESKEN unit. I first assembled several IKEA VESKEN shelves. I used four at first, and then, by using five, I was able to build an extra level on top. So instead of having the original number of levels, I ended up with one additional floor: my IKEA VESKEN unit has four levels instead of three.

The reason was practical. Since I’m 1.75 m tall, it’s easier to reach and organize the items when the shelves are positioned a bit higher.

The main challenge was the 3D-printed parts. My printer’s build plate was too small, so I couldn’t print the dovetail-cut extension as one piece. To solve this, I modified the design so the extension could be printed in separate parts and joined together using a dovetail joint. That made printing and assembly straightforward, and each frame was assembled very quickly—under two hours.

Overall, within less than a day I managed to add the extra level. With this method, I can confirm the frames are easy to fit together. I added a little Pâtex Express wood glue between the joints for extra reassurance, but the dovetail connection already lines up well and stays solid. JUst another point a propos remix It is actually a remix from printables or from Makerworld//https://makerworld.com/de/models/1622791 fron Torch but as we cannot set an eternal source I put it here in the description

Category: Organization

Tags