Flashforge AD5X 4mm Glass Bed Clips
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple snap-on clips for securing a 4 mm glass build plate on the Flashforge AD5X. Designed to lock onto the front edge
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 14
- Makes
- 0
- Views
- 98
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
These clips are designed to securely hold a 4 mm glass build plate on the Flashforge AD5X.
The clip hooks into the slot underneath the front edge of the build platform and snaps over the glass, holding it firmly in place.
Print settings
Material: ABS (recommended)
Infill: 100%
Installation
Hook the clip into the slot underneath the front edge of the build platform.
Press it down until it snaps over the glass.
Repeat on the other side.
In my experience, two clips on the front are enough. The rear edge of the glass is already held securely by the printer's original bed brackets, so additional rear clips are unnecessary.
Designed specifically for:
Flashforge AD5X
4 mm glass build plate
If you find this model useful, please consider leaving a like or posting a make!