5 Volt Power Cube
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Takes 12V-24V in and outputs 5V with various connection types (USB, Binding Post, Barrel Jack)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a reliable continuous source of 5 volts. I've found that power banks tend to shut down if they don't sense a continuous high charging current. I printed in Rainbow PETG to make it car heat-compatible, and because I didn't want a plain black box.
Details
Takes 12V or 24V in via an XT60 connector
Outputs 5V up to 20 amps via various connector types
USB A Female X 4
Binding Posts
5.5mm x 2.1mm barrel jack
Includes Volts/Amps display and lighted power switch
Parts List
Drok 12/24V-to-5V 20A power convertor https://www.amazon.com/dp/B00F0FYPPQ
Panel Mount Volts/Amps Display https://www.amazon.com/dp/B0BD418JNP
Lighted Switch https://www.amazon.com/dp/B00A0BAYR8
Panel Mount USB Power Outlets https://www.amazon.com/dp/B0GZ2RL17W
5.5mm x 2.1mm Barrel Jack https://www.amazon.com/dp/B07XCNSM81
Panel Mount XT60-M Connector https://www.amazon.com/dp/B0CFGT2WVV
Fuse Assembly and 10A Fuse (old stock)
Binding Posts https://www.amazon.com/dp/B0863C1CMR
UV Resin Glue https://www.amazon.com/dp/B0DX23J9YL
Rainbow Translucent PETG https://www.amazon.com/dp/B0BBVC9N4G
Gradient Blue Translucent PETG https://www.amazon.com/dp/B0BHL2TJ8G
M2 12mm Pan Head Screws X 4
Construction Notes
I secured the USB power outlets in place using UV Resin glue due to them coming out when unplugging a USB cable
Source: https://www.tinkercad.com/things/fuj2Jkajj7N-5v-power-cube