1 / 1
MOLLE/PALS library: patch slider
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
the base shape for high/wide PALS patches (2O) without cuts, aka “slider”
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Shapes for further customization, for example to create patches with emblems to show on your backpack or vest. Import in FreeCAD or any other software.
This is the “slider” variant for belts, not the variant for webbings.
By design the face itself is not at the same height as the belt allowance—you will need supports.
Designed to be printed with a 0.2mm or 0.4mm nozzle.
6–4 walls, 20%+ infill
The ideal material for this is: PA66
… else use something with a good layer adhesion (>24 MPa) and UV-resistance