Parts for acquire
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Board, grid pieces and hotel markers for the board game acquire. I printed the board mostly in black, with a colour…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 57
- Makes
- 0
- Views
- 538
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Board, grid pieces and hotel markers for the board game acquire. I printed the board mostly in black, with a colour change to white at 1.8mm and back to black at 2.8mm (so the letters are readable). The pieces I printed in white, with a change to black at 4.6mm and change back at 5.6mm, to get the inverse effect on the pieces.
I inset holes in the board quarters for 5x5x1mm magnets, which I got for a few pounds from ebay. I hot-glued most of them, but after one fell out I reglued it with superglue. I think superglue is the better choice.
The hotel parts are designed from the cards available at water bear games, and I printed them in the colours used on those cards.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15-45%
Notes:
The board and pieces I printed with 20% infill (though there's not much of it).
The hotel markers I printed with 45% infill for the lowest 10mm, and 15% infill for the remainder (Using 10mm-high-modifer.stl as a modifier in slic3r). I was hoping they'd have a noticable extra weight at the base and be less susceptible to being knocked over. I'm not convinced it's made any difference though.
Category: Games