Minimal Display Stand for Hot Wheels & 1:64 Die-Cast Cars
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A display stand for Hot Wheels and other 1:64 scale die-cast cars. The stand is designed as a press-fit assembly
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 49
- Makes
- 1
- Views
- 122
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
A simple, clean display stand for Hot Wheels and other 1:64 scale die-cast cars.
The stand is designed as a press-fit assembly and normally does not require glue. The parts use approximately 0.1 mm clearance, which matches the typical tolerances of most well-calibrated FDM printers. Based on my testing, the parts fit together securely after printing.
Two display plate versions are included:
Standard – for most 1:64 vehicles.
Long – for slightly longer models.
Printing Notes
Designed for PLA, but other rigid materials should work as well.
Glue is optional if you prefer a permanent assembly or if your printer's tolerances differ.
No supports required.
If you have any suggestions or improvements, feel free to share them!
Enjoy!