BLV MGN Cube 410mm CR10s bed mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mod is to be able to use 100% of the standard printers reachable area(350x350x350mm) for printing using an easy…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 12
- Makes
- 0
- Views
- 618
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This mod is to be able to use 100% of the standard printers reachable area(350x350x350mm) for printing using an easy to find bed. The bed used is a Creality cr-10s 410x410mm.
Moving extrusions:
Place the 405mm long 2020 extrusions like in the image and move the Z axis extrusions back so they are 190-195mm from the front upright extrusion.
The front 2020 extrusion used for mounting the front panel needs to be removed or moved down until it clears the Z carriage extrusions when in the lowest position.
Move back the back panel if necessary.
Printing files:
Print two of each of the bed mounts named : 2x Bed Mount.stl and 2x Bed Mount Mirrored.stl
This part can be used with a zip-tie to of load the solder pads on the bed :Bed Mount Cable strain relief.stl
Print the slim front panel if you want to keep a similar look to the original, it is made for my clone 4,3" Paneldue, 3x 16mm buttons and the neopixel rings. Included a .step file for easier modification. These are made for printers with atleast 290mm of printable length( which you should have at this point) files:Front Panel Left 4,3 paneldue.stl, Front Panel right.stl, Right Back.stl, Left Back.stl
To get around how tight it is with the front 2020 extrusion I use a printed 7mm extended socket to adjust bed leveling:Bed leveling key.stl
Category: 3D Printer Parts