Silly Shell Adapter for the Finisher 3.1 Nerf Blaster
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A SillyShell adapter that clicks into place instead of the drum allowing for alternate ammo to be used.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 6
- Makes
- 0
- Views
- 101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a print-in-place Silly Shell adapter for the Finisher 3.1 allowing for different ammo to be used.
It clicks in place of the drum so upgrading to the swappable drum is required, with an inset hinge that fixes onto the drum spinner for support but also allows it to spin freely between shots.
Included is an adapter with custom made supports that pull off easily as well as a version where generated supports are needed.
Optional upgrades include:
Solid spinner with no external screw hole
Longer drum swap button so you don't have to press it as deeply to eject.
Sillybutt's Ejector_ButtonVersion from the Wildstyle for convenience. Other ejector styles are out there.
TPU o-ring (with my preferred TPU print settings for Fiberflex 30D TPU filament, remember to dry the filament and cut off a 2g strand from the spool and feed it into the external for a smooth print)
You'll need the standard ejector lever screw, with extra hardware being a 19OD x 14mm ID x2.5mm O-Ring (or print one out of TPU) and a M3x10 screw.
The adapter fires single standard darts at the same pressure as darts in the drum.
However because the Finisher is not a high pressure blaster, firing MegaXL darts requires a specialized shell which should allow you to fire the dart instead of it getting stuck in the standard shell. It flys across the room in an arch with no whistling but it does fire.