1 / 1
FlexiPi+ (Retropie with fan Redux)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modification of the FlexiPi + case so that it now has some more decorations and it now includes fan holes.…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 233
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A modification of the FlexiPi + case so that it now has some more decorations and it now includes fan holes. Instructions used from that post with added parts for fan mounts. I also converted it into the more standardized format of DXF.
Instructions
Instructions
Required parts:
Any material which is 3mm thick and laser cutting compliant (size: 200x140mm)4 screws M2.5 x 20
4 nuts
1 Raspberry Pi model B+ :)
Use 2 washers on each screw to raise the Raspberry board up in position.
Small Case Fan + Nuts and Bolts For it (Most likely a 30mmx30mm fan)
Category: DIY