Plump Duck Spinner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cute, plump duck spinning top that makes use of a rack and pinion gear to launch and spin.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 12
- Makes
- 0
- Views
- 171
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Share Alike
Plump Duck Spinner
This model is perfect for anyone who is looking to print a spinning top for battle or play, or for duck lovers alike. This model is perfect for battling with friends or just as a gag gift. And you know what is better than one spinning duck? An army of them...
This duck spinner makes use of rack and pinion gears to launch and spin the spinning top.
Assembly
Steps for Easy Assembly (as shown below):
Push the point of the spinner into the base until a click.
Place the peg cylinder-side-up into the flat side of the base.
Slot the blade into the peg. Make sure the flatter side of the blade is on the bottom.
Slot the top of the spinner onto the peg. Make sure the face is in the opposite direction of the duck's tail on the blade!
To Put the Ripcord and Launcher Together:
Slot the head of the duck spinner into the bottom hole of the launcher.
Slide the ripcord into the side of the launcher, making sure the teeth of the ripcord are facing towards the duck spinner. (Remember to put the ripcord into the correct side of the launcher. If unsure remember that the ring for the ripcord should end up near the head of the duck on the launcher).
Slide the ripcord in all the way. The duck spinner should spin while this happens.
Printing Recommendations:
Supports shouldn't be needed for any of the parts except for possibly the center peg.
PLA can be used but PETG is recommended for better durability especially when battling other spinners.
The duck face colours can be painted on after 3D printing or painted on in the printing software used.
Glue is not necessary for this model, however it can be used to provide extra strength to the joints.
Disclaimer:
Due to a lack of a 3D printer, personal testing of this model hasn't been possible. However research was done on dimensions and careful work has been done on the measurements of the model to help ensure the functioning of this model. If any issues arise with the measurements of this model, I will be happy to rectify these issues where possible.
Likes, makes, downloads and comments are all greatly appreciated. Thank you.