3.2L Kipp Dry Food Canister Dry Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dry Box fit for 3.2L Kipp Dry Food Canister
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 33
- Makes
- 0
- Views
- 247
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v2.0
Here is the Final Boss of the 3.2L Kipp Dry Food Canister Dry Box.
Assembly Guide on YouTube
TL;DR
Features
Passive spool rewinder (using ₱8 retractable ID badge reel springs)
No permanent modification to the Kipp container
Removable desiccant tray
Fits standard 1 kg spools, maybe 0.5kg too
Minimal necessary hardware
Notes
Designed specifically for the 3.2L Kipp Dry Food Canister
Badge reels may vary between sellers but any should work fine
Tested and verified working with spools from:
B*mbu
Kingroon
R3D
Background
After consuming way too many 3D printing videos on YouTube, I came across "Filament Storage 2026 – The Final Boss of My Drybox Journey" by GunplaMark.
Like many of us, I initially got into 3D printing to make useful stuff... then quickly realized the real purpose of a 3D printer is upgrading said 3D printer-and everything around it.
His dry box design genuinely impressed me. It was thoughtfully engineered, but what hit me the most was the passive rewinding system.
However, the main component (the box) was sourced from Amazon or other stores that aren't as accessible to the local 3D printing community. I even tried looking for the same 4L cereal boxes they used on Temu but nothing popped up that fit the requirements. So I decided to design my own dry box that captures the same experience while using a container that is readily available to us.
That led me to challenge myself to fit the entire mechanism into our favorite little dry box: the 3.2L Kipp Dry Food Canister.
I also wanted to leave the box itself completely unmodified (no holes, etc.) in case it would ever be repurposed (though highly unlikely).
The Design
The result is an (admittedly) overengineered dry box that packs many features into a surprisingly small space.
Although I would've liked to design a whole lid, I only run an A1 Mini so I had to chop up some parts. To connect said parts I've used another design technique named the Drop Lock dovetail joint from NeedItMakeIt found here.
The main feature is the passive spool rewinder. It keeps slight tension on the filament, preventing slack from building up inside the box while allowing the spool to rewind itself as filament is unloaded/retracted. It is powered by the springs from cheap retractable ID badge reels you can find on Shopee/Lazada for ~₱8 each. I've adapted the rewinder design from GunplaMark and adjusted it to fit our boxes. Assembly of the rewinder should be identical to his original guide, which you can find here.
Another feature is the removable desiccant tray that can be easily taken out independently of the main assembly but remains locked in place in case of any mishandling. The tray also has holes on both the top and the bottom so you could (in theory) chuck it into your spool-drying pipeline to reactivate the desiccant.
I also modified the OpenSCAD file used to generate spool adapters to adjust for the reduced length of the rewinder. There are a few notes in the file, so if you do use it, please read them carefully.
There's also another set of models in case you want to print some features in a different/accent color.
Printing Notes
All components should be printed in PETG or a stronger material. PLA is not recommended since it can creep under constant tension and isn't exactly flexible enough. I used transparent PETG for my prints (one generic, one from Kingroon) with a 0.2mm layer height.
Everything except the 'Desiccant Tray Lid' can be printed without supports. That part really needs supports as it has to print some steep overhangs. I printed mine with a 0.32mm Top Z Distance on Normal(manual) Snug supports.
Aside from the badge reels and the hygrometer, everything can be 3D printed. I've seen models of 608 bearings and PC4M10 tube connectors floating around the net, though I prefer hoarding hardware so I haven't gotten around to trying them out.
You also may want to use needle-nose pliers and flush cutters for support removal, extracting and installing the spring, and installing the base.
Compatibility
Compatible with spools up to 67 mm wide. I've tested with 1kg spools from B*mbu, Kingroon, and R3D. Though I had to design custom adapters for B*mbu spools. (more on this in openscad file)
I know this is the "Final Boss" but no project is ever truly finished. Should you have any issues or have any ideas for improvements, let me know. I'd be more than happy to update it.