1 / 6
Crocodile Skink with 7 hidden 6x3mm magnets (1 pause) and 2nd pause for manual filament change — image 1
1 / 6

Crocodile Skink with 7 hidden 6x3mm magnets (1 pause) and 2nd pause for manual filament change

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I loved the original and wanted magnets that were hidden, eyes and a pause to add some more colour to the print...

Rating
4.933 / 5
Likes
197
Downloads
779
Makes
15
Views
5,114
Reviews
15

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I loved the original and wanted magnets that were hidden and a pause to add some more colour to the print...  

I printed in Bronze silk then Rainbow silk to get the colour.

1st pause in the print is at the top of the magnets.  At the pause, insert the 7 magnets in the holes and restart the print.

2nd pause is for the manual filament change to add some colour to the spines and head.

I also added a file for eyes in TPU.  I used red then black after the pause in the G-code.  Once printed, line the “pupils” up and pop them in.

…and a test file for the magnet sizing - one of the arms - just to make sure your brand of magnet fits before embarking on a long print.  I got mine from the big 'A'; their 6x3mm 100 pack.

This was printed on a MK3S+ .4mm nozzle, .15mm layers and no brims or supports at the default 215/210C PLA nozzle and 60C bed. 235C TPU nozzle and 55C bed. Don't forget to put some glue down on a smooth bed as a release agent for the TPU…

Final note: I did start the filament change way early on the pictured model… …because reasons.

Tags