Planter sidecar for strawberry runners
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.71 – €4.54 net (excluding VAT)
For file: strawberry runner sidecar_0.4n_0.2mm_PLA_MINI_4h18m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.13 excluding VAT (range midpoint).
- Weight reported by the author
- 48 g
- Print time reported by the author
- 4.3 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Planter add on to plant strawberry runners. Fits a 10 inch pot
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
I have a strawberry plant that's shooting off runners! I wanted to root the new runners in a small planter and grow a few new plants. There isn't room in the actual planter to hold the four inch pots so I came up with this idea. it holds a 4 inch pot that can be removed once the runner has fully taken root and is growing on it's own.
This is sized for a 10 inch pot with a thickness around 2.5 mm.
I used this little pots off Amazon. https://www.amazon.com/dp/B07QMRL18L?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1