Peephole Cover
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.20 – €0.24 net (excluding VAT)
For file: Peephole-Cover_0.4n_0.15mm_PETG_MK4S_13m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.22 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 13.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Cover I designed for a very specific Peephole I found, not universal but might be useful to others.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I found a peephole insert at a local Flea Market for a dollar, likely an old overstock. It did not have a cover, but for me it is a requirement to prevent anyone from using a peephole reverser to look through my door. This was highly specific for the model that I have, but I imagine that other peepholes would have the same or similar tooling. The design is a bit complicated but I wanted it to be overbuilt and sturdy. I also uploaded the F3D file in case anyone want's to adjust the design to fit their particular peephole model.
Required Materials
PETG in desired color(s)
1x M2.5x8 Socket Cap bolt
1x M2.5x6 Button Head bolt
1x M2.5 Washer
1x M2.5 Hex nut
1x M2.5 Heatset insert
Print Settings
PETG 2x Perimeter walls, 15% infill
0.15mm layer height, 0.4mm Nozzle
Pause on layer 18 to insert Hex Nut
Assembly Instructions
Melt heatset insert into the Body, then slide the body over the inside peephole so the ring is flush
Screw the Socket Cap bolt into the handle
Install the Peephole using the Peephole instructions
Screw the Lid onto the Body using the Button Head Bolt into the heatset insert, while placing the washer between the body and lid, to allow for a gap for rotation. You can adjust the tightness of the screw to ensure it stays up while open.