C4-XM87
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a cosmetic kit that makes your Caliburn 4 resemble an XM8.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 12
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
PLEASE READ BEFORE PRINTING
C4-XM87 - By Goose Arms
WARNING ( This is not a real firearm, this is a kit for a TOY that shoots foam darts. This toy is recommended for ages 14+. As always eye protection should be worn when playing or using gel balls, foam dart, or plastic bb toys. Please handle with care and use wisely. This is a toy and is not a real firearm but persons of the public may think otherwise. )
Info
This is a cosmetic kit that makes your Caliburn 4 resemble an XM8.
Hardware
12, 3/8 in 10-32 screws
5, 1 in 10-32 screws
1, 1-1/2 in 10-32 screw
Printing
All parts were printed on an A1 Mini. If some parts are too big, consider rotating them 45 degrees. The only setting you need to turn on in your slicer for this project is supports.
Assembly
The top rail is the longest
The side rails are the shortest
All rails are optional
8 of the 12, 3/8 in 10-32 screws are used to secure the piece to the picatinny of the caliburn while the other 4 are used to attach the side plates ( these are the black pieces in the images above )
The 5, 1 in 10-32 screws are used to secure the four sections together
The 1, 1-1/2 in 10-32 screw is used to secure the front side picatinny rail to the piece if you only want to use one rail then a 10-32 hex nut is an optional part you can use to secure the screw in place
Final Regard
If you have any questions, want to inform me of anything about this build, or want to send photos of your build please email [email protected].
Thank You
Sincerely- Goose Arms