1 / 4
Yaesu FT817 / FT818 Cross Rail
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cross rail that goes along with the popular 3D print side rails for the FT817 / FT818
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a monorail foot to go with the FT817 / FT818 rails that were designed by https://www.thingiverse.com/thing:4118033
I prefer this to having individual feet. This rail nicely clears the mic when folded against the radio body. Use M4 x 16 screws and M4 nuts. You can set the height to one of three positions - folded, partial elevation (rail full forward), full elevation (rail as shown in photos above).