Icy-cool fan straightening bracket.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bracket to keep the icy-cool B- 379282 16" desk fan straight
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 12
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
Icy-Cool Straightening bracket for B-379282 (16" black desk fan 65w)
What it is and why i made it.
I designed this model for my icy-cool fan which broke something inside which meant it leant forward and fell down because gravity.This is a simple bracket i made in fusion using 3 curves. 1 of them is 56mm to go around the top part of the stem.The other 54mm to go around the bottom and a 72mm one that arches around the speed collar.Its simple but effective.It keeps the fan straight and uses a small amount of filament.
Recommended Print settings.
I did 6 walls and 15% gyroid infill i printed it as pictured below.
How to install it.
It is installed like pictured below.Just sand the inside of the curves and put the appropriate one on each side.(One is slightly larger than the other because the stem widens)
Added notes.
This is under an attribution ,Meaning you can do whatever you want with this along as I'm credited somewhere.Happy printing,Hope this helps someone.