1 / 5
Better PSU holder for THE100 extended
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An easy to print PSU holder that snaps on the frame
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My printing parameters were, 15% cross hatch, 3 walls, 4 bottom and top layers.
For the orientation, print it with the lip facing upwards.
PETG is the best for this, but PLA is usable too
If you want to prevent the PSU from sliding out, add a M3 5mm heat insert from the bottom and use a M3x12mm screw that threads into one of the slots, it is optional though
And i recommend lining the inside with some ducttape because of tolerances