1 / 1
Penzey Spice Drawer Insert — image 1

Penzey Spice Drawer Insert

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a insert to help hold Penzey spice jars in place and angled for easier reading. Holds 18 jars in 3 rows.

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
38
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

This is a spice tray to help hold spices in place in a kitchen drawer at an easier angle to read. Fits drawers 13 inches wide, and holds 18 full size jars. The tray also nicely holds two mini-jars in a single jar slot for those smaller use spices. While it was designed for Penzeys spice jars, other spice jars are often close enough in size to fit nicely.

The tray is cut into 6 pieces to facilitate printing. Assemble the columns first, then slide the two columns together to complete the set. I would suggest using adhesive to help hold the pieces together, or a non-slip mat underneath to keep the pieces in place. 

If you have a large enough printer, use the "-NoCuts" file for a one-piece print.

I strongly recommend printing with Z contouring or Z anti-aliasing set to true, or print with a very fine layer height. The shallow angle makes the stair-step of a 0.2mm layer height quite noticeable. Other settings can be left to default, and no supports should be needed for the 8mm overhangs in the alignment notches.

Total Dimensions: 330mm wide (13 inches) x 357mm long x 13.2mm high. With a 50mm diameter jar, total drawer depth needed is approximately 66mm.
--------------------------------------
Disclosure: AI was used to write the FreeCAD script to repeat the alignment pins across all 6 objects. No AI was used in modeling the original part or designing the original alignment pins.

Tags