Floating Chlorine Tablet Dispenser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A floating dispenser to help keep pools properly chlorinated.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 82
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Why Remix It?
This remix is something I did just to work a bit better for my needs. I pulled it into Solidworks and made some small tweaks.
Changes to Base:
Scaled the existing 3in version by 0.95 because I felt there was too much slop.
Scaled the existing 3in version by 0.35 to better fit a 1in tablet.
Changes to Cap:
Scaled the extings 3in version by 0.95 because I felt there was too much slop.
Scaled the existing 3in version by 0.35 to better fit a 1in tablet.
Added hex holes on bottom surface to aid in better absorbtion.
Added chamfers to windows to reduce bridging distance when printing without supports.
Printing Recommendations:
Material: PETG or ASA.
If you really want to you could get fancy but those should both be great options.
Perimeters: 4-6+
This is really where you get "waterproofing" (if there is such a thing) on most 3D prints like this. So I would do a minimum of 4 but more as needed.
Supports: None
Brim: Depends on your printer. I printed both sizes on my C1+ with no issues on a satin build plate.
Infill: I tend to prefer gyroid on this because it helps prevent any warping by breaking up the directions of the internal forces as it cools.