Eaton Buss 15600-10-20 Fuse Panel cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cover for the 10 fuse fuse panel made by Eaton / Buss
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Cover for Eaton Buss 15600-10-20 Fuse Panel that holds 10 fuses. An M6 bolt with a thumbwheel holds it on. You can find the CAD file on OnShape (bussman_12v_fuse_block_lid) if you want to scale it for the smaller fuse panels (4 fuse, 6 fuse, etc). There are 2 ways to mount the cover:
1. Drill a 5mm hole and tap the plastic with an M6 tap. The plastic is thin, but it holds. There's not a lot of thread engagement, but it only has to hold on the cover. Make sure you choose your bolt length so it doesn't extend down to the bus bar.
2. Use an M6 threaded insert. Drill a smaller (~4mm hole) and melt the insert in. The plastic is thin, so this is touchy to get right. This is what I did, but I should just have stayed with the threaded plastic.
Filament: PETG
Infill: 15% rectilinear
Supports?: No
Center bolt is M6
5mm drill bit and tap (if you're not using an insert)
(optional) M6 threaded insert
Thumbscrew from @MiklosiczaLev_347137 here