1 / 1
Frieren No.5 HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I turned *Frieren* (the anime) into 2D art using HueForge.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It didn't turn out perfectly, but from a distance, it looks like Frieren. (;'∀')
Print with 100% infill and a layer height of 0.08mm. Set the base layer to 0.16mm.
Filament swap sequence:Initial filament: Black
Switch to next filament at layer #8 (0.72mm): Light Green
Switch to next filament at layer #9 (0.8mm): Orange
Switch to next filament at layer #14 (1.2mm): Red
Switch to next filament at layer #16 (1.36mm): Gloss White (use until the final layer)