OpenLock HeroQuest

All rooms from the HeroQuest board game adapted to OpenLock bases.

The underside of each base is engraved with the room no, room size, room co-ordinates and Heroquest logo

Rooms 13 and 14 have variants if you want to attempt to build the map with OpenLock walls.

WALL 1 variant thins down both room 13 and 14 to allow a wall to fit between without increasing the overall board size

WALL 2 variant thins down just room 13 to allow a wall to fit between it and room 14 increasing the overall board size

Room numbers used from this map:

https://heroquest.fandom.com/wiki/Guide:Rooms_and_corridors?file=HeroQuest_gameboard_numbered.gif

The room co-ordinates used, follow the same notation as Excel (Letters for Columns and Numbers for Rows)

Heroquest logo used from here:

https://www.printables.com/model/1591680-heroquest-logo/files

Halls now finished with a few variants so you can mix and match your own for what you need.

OpenForge low walls now added. I remixed them to be double sided to suit Heroquest. 

I also made a special wall with a gap big enough to fit the 2021 Heroquest door. The door is slightly larger than 1 inch, so you need to mount it to 1 side of a 2 inch wall position. It's not perfect, but after painting all of those doors, I just had to find a way to include them in this build.

PDF map attached shows co-ordintes and my plan for incorporating walls by including half tile gaps between corridor tiles at strategic locations. Will upload a photo of the finished product once I have it all printed and painted.

****  UPDATE 1 ****

ROOM 07 top was too thin and ended up floating above the base plate in sections. I have thickened the top up and reuploaded a fixed version now. Sorry for not picking this up earlier.

****  UPDATE 2 ****

Infill pieces added in a variety of simple styles. These are needed to get the map to suit the original hallway tiles placement.

Next project: OpenLock Advanced Heroquest!