1 / 1
Frieren No.3 HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I turned *Frieren* (the anime) into 2D art using HueForge.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 2
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It didn't turn out perfectly, but from a distance, it looks like Frieren. (;'∀')
Print with 100% infill and a layer height of 0.08 mm. Set the base layer to 0.16 mm.
This print uses three types of filament.
Filament swap procedure:Initial filament: Black
Switch to the next filament at layer #9 (0.8 mm): Gray
Switch to the next filament at layer #16 (1.36 mm): Glossy White (used until the final layer)