1 / 4
5-lane Spring-Loaded Starting Gate for Diecast Cars and Hot Wheels — image 1
1 / 4

5-lane Spring-Loaded Starting Gate for Diecast Cars and Hot Wheels

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Sping-loaded starting gate for fair starts racing your hot wheels cars or other diecast cars.

Rating
0 / 5
Likes
2
Downloads
10
Makes
0
Views
132
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Print the tower in ABS for rigidity. Print the spring-loaded starting gate in PETG for rebound strength. Print with small layers - I printed mine with 0.12 mm layers to ensure that the connectors fit in the angled slots.

Spring strength will depend on your print settings and infill. I printed with 3 walls and 15% infill. 

UPDATE: I have added additional options for easier printing. It can be split into 3 different plates and printed vertically with minimal support. Note the support blockers in the picture below. It can also be printed without the starting gate on its back side as in the bottom-right plate in the image. I recommend using the 3mf file because the models have been cleaned up and oriented correctly:

Update 2: The guides on the left and right edges of the starting gate have been removed to reduce friction.

Compatible with Custom Hot Wheels Track System.

Check out my profile and the link above for other track pieces to connect!