Inflation pump hose clips (Pool/SUP pump)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two different clips for storing the hose at the pump.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Open Community License v1.1
Two different clips for snapping the hose on the pump body.
It will keep the hose in place but its not intended to carry the pump by using the hose as a handle.
3-4 clips do the job. They can also be used vice versa for thighter fit of the hose. Both clip models can be used mixed or as group of the same kind.
No additional materials are needed for use. Optional the clips can be fixed on the pump with some small household rubber bands or fixed with double sided tape. I just clipped them without.
The shape was created to get the clip between main and secondary pipe of a double action pump. On a single action pumps does fit as well.
dimensions:
-overall: 135 x 80 x 15 mm
-pump diameter 75 mm (On many pumps the diameter ist a bit plus or minus 75 mm.)
-hose diameter 25 mm
-thickness: 2,5 mm
I used PETG and standard or "strong" print profile without any supports.