1 / 3
Discotehk maker coin
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Maker Coin! All three parts have a .3mm gap so they should spin independently of each other if your printer has the…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 1
- Views
- 113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Maker Coin! All three parts have a .3mm gap so they should spin independently of each other if your printer has the tolerance for it. Made it while learning the absolute basics of Fusion 360.
Turned the middle ring into a fidget spinner because I was bored. https://www.printables.com/model/180078-discotehk-spinner
.2mm layer height.
Print Settings
Resolution:
.2mm
Notes:
The recessed faces are all designed with .2mm layer height in mind.
Post-Printing =============
Maker Coin!
Category: Gadgets