Kenwood SB050 Couplers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A drive-coupler and cutter-coup used on the Kenwood SB050 smoothie maker. They no longer available to purchase spares.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 11
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Kenwood SB050 smoothie makers uses a drive-coupler to interface the motor shaft to the cutter assembly and when this component fails it can no longer be purchased as a spare. This model was designed to replace the worn out drive-coupler.
Likewise, when the cutter assembly coupler fails you have to purchase a whole new cutter assembly as they cutter-coupler cannot be purchased separately. The 2nd model was designed to replace the worn out cutter coupler (those with square nut only)
I printed these models using ASA-Carbon filament with 100% fill. This results in very stiff and robust engineering components.
You should also be able to use PETG, PCTG, Nylon, or these filaments with CF mixes, but you would need to experiment to find the appropriate filament for your requirements.
I have no data on longevity of the model but as it only takes around 35 minutes to print the drive coupler and 21 minutes for the cutter coupler, they are models that can be quickly printed if a new one is required.
With the cutter-coupler there are two STL files; one with a floating base which has better adherence to the build plate and one without.