Cold Shoe Ball-Joint Camera Arm — Adapt It To Your Rig — No supports!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjustable Ball-Joint Camera Arm with a Cold Shoe Mount — Attach a light, phone holder, mirror, monitor or mic fast. 📷
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 7
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The problem it solves:
When working on a camera rig, you often need to position a small accessory (a light, microphone, mirror, phone holder, or monitor) at exactly the right angle — but most simple, rigid mounts either point in only one direction or are hard to adjust while filming.🤔📽

Solution:
This arm offers a simple, printable solution: a ball-joint arm that screws into your rig's cheese plate on one end, and offers a cold shoe mount on the other, letting any standard cold-shoe accessory (a light, mirror, mic, or a monitor/phone holder with a cold shoe adapter) slide in instantly — no tools required. 🦾

Want to swap in your own cold shoe instead of the one included here? Or attach something else with a standard 1/4"-20 thread? No problem — since it's a standard size, you can easily swap it out.🔩👍
Connections 🔩:
Bottom: Standard 1/4"-20 UNC screw thread, which screws into any cheese plate, cold shoe, or tripod head hole.
Top: Standard cold shoe mount, the native connector for most commercial lights, microphones, and mirrors.
Print settings 🔧:
System preset: 0.10mm FAST DETAIL
Filament: Prusament PETG/ASA/PC Blend (PC Blend information) - The best: Prusament ASA
Support: No
Brim: Yes
Infill: 15%
Lightweight!
bottom(14-20)_screw — 1g
ball_joint_2_screw — 1g
cold_shoe — 4g
ball_joint_1 — 3g
CONN_screw — 1g
ball_joint_2 — 1g
base_rod — 1g
connector_rod(and_top) — 1g
Assembly 🛠:
This is the assembly for a small arm. If you print more "CONN_screw" files and "connector_rod(and_top)" files, you can make the arm bigger! 🏗
3D CAD software:
The design was created in Autodesk Fusion. 🖥 I recommend it to everyone!
Tested against:
The design is based on the standard dimensions (cold shoe, 1/4"-20 UNC), making it compatible with most commercial rig accessories without being tied to any specific proprietary product.
Cheese plates 🧀 🎥:
You can find really good cheese plates on kondorblue.com. You can screw the lever into it with the 3D printed screw. Some examples:
You can also buy a simple cheese plate. It will be compatible with any camera.
That's a wrap 😃
Thanks for checking out my design — I'd love to hear your feedback, especially if you have any ideas on how to improve it. Happy printing, and enjoy every shot! 📸