1 / 4
16mm drag chain spacer for Fysetc CNC bed on a Voron V0.2 + PCB + Z extensions + T8 Nut Block + Info — image 1
1 / 4

16mm drag chain spacer for Fysetc CNC bed on a Voron V0.2 + PCB + Z extensions + T8 Nut Block + Info

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple 16mm drag chain spacer for the excellent but poorly documented Fysetc V0 bed. PCB version also.

Rating
0 / 5
Likes
2
Downloads
10
Makes
0
Views
88
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

The Fysetc CNC bed mount for the V0 fixes all the bed bending issues and makes the printer awesome.  It's an amazing product, but is also very frustrating that there is no documentation.

You need this spacer if you have a V0.2, the drag chain needs to be spaced out. 
Required hardware: 
2x  M3 x 25mm FHS or BHCS (Drag chain -> Spacer ->CNC Bed)
2X - M3 x 12mm SHCS (T8 Nut Block to CNC Bed)

PCB Spacer Option:
The spacer with the slot holds the bed fans PCB.  I got a bit lazy with this one, the screw self taps. There is not much room for a larger slot, file or sand the burrs off the PCB edges. 

required: 1X M3 x 8mm FHS


If you currently have Kiragami bed, the required stock V0.2 nut block is included in the files section.

Spring Compression:

There is not enough spring compression after you install the bed.  You can install spacers, use a jam nut or increase your Z travel.  In order to quickly increase the Z travel, I printed out extended plastic rails with integrated Z stops.  It's very quick and dirty, but it works. Note there is about 4mm of end cap on the carriage, so at the most only 1-2 balls actually roll off the rail.  The included 8mm extensions allow for the 126mm of total travel in the Z you need to fully compress the springs. 


--

Furthermore it is super frustrating optional parts are included in the packages with no links to parts, but not required ones. You don't need to run the wago connectors or PCB, but you do need the T8_Nut_Block. Those upgrading from Kiragami bed kits do not have the T8_Nut_Block printed. The optional parts I could not find on this github, furthermore they should be better designed with thicker walls and pull through inserts.

Required Printed Parts:

https://github.com/VoronDesign/Voron-0/blob/Voron0.2r1/STLs/T8_Nut_Block_x1.stl

16MM drag chain spacer for V0.2

Required Fasteners:

8X - M2x8mm SHCS or BHCS (bed to linear rail blocks)
2X - M3 x 12mm SHCS (T8 Nut Block to CNC Bed)
2x  M3 x 25mm FHS or BHCS (drag chain16mm spacer to bed)

Optional:

[Bed Fans & Connection Mount for Fysetc CNC Bed](https://www.printables.com/model/859647) — driftrotor

2X - M3 x 14mm SHCS or BHCS for fan to bed without wago/pcb mount.

[Fysetc CNC Bed Frame 3010 Blower Mount](https://www.printables.com/model/1242852) — tipsyboo (alt fan mount)

4X - M3 x 12mm BHCS for fan to mount.

[Fysetc CNC Bed Mount Spring Spacers](https://www.printables.com/model/863637) — 4GAuto