Aftermarket Mega Missile Stretcher
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Aftermarket Mega Missile Stretcher
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 4
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description:
I got tired of not being able to use the 3rd party mega missiles I bought for blasters like the Demolisher 2-in-1 and Fortnite GL, because they were too tight around the post. To fix that, I created these stretchers to leave in the rockets when they are stored. Give them at least a day or two to expand the foam.
18.0mm: Good for blasters like the Fortnite GL that have a decent amount of power
18.4mm: Better for lower-powered blasters like the Demolisher 2-in-1 that need a bit more help
Printing Instructions:
Do not use supports. I recommend PETG with 6 walls and 30% gyroid infill, but PLA should be fine. You are putting pressure all the way around most of this print, so it needs to be strong. This must be printed vertically to maintain the shape. Be sure you deburr the tip to help prevent tearing the dart.
Installation Instructions:
1. Deburr the tip to make sure you do not tear the foam.
2. Shove it into the back of a mega missile.