Distance holder (6cm) for fence work.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Distance holder (6cm) for fence work.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
A distance holder for those who need to place a horizontal fence (see picture).
Keeping the correct distance can be a problem, especially if you work alone, so I decided to create this.
I made it to keep the boards 6cm from eachother (10cm keeps too much open for nosy neighbors to see through).
The height is 6cm.
The measurements of the wooden boards can be up to a thickness of 16mm (most are 14-15).
To use, simply slide the long end over the previous board, put your new board on top of the holder and screw the board tight... twist the holder sideways to remove it from between the boards and place it for the next one.
Print settings:
Filament: PETG (or stronger... PLA was too weak)
Strength: 3 walls (minimum)
Infill: 25% (minimum, 50% is better)