Weefun Tina 2 Bowden guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bowden Guide to replace the Spool-Holder on the Weefun Tina 2.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Bowden guide to replace the spool-holder on the Weefun Tina 2. Great for use with an external filament dry box.
Print Settings...
eSun PLA+ Grey,
0.4mm nozzle,
0.2mm layer height (0.3mm first layer),
190°C nozzle,
60°C bed (but not entirely necessary),
No Supports,
Printed on a Creality Ender 3 (but can be printed on the Tina 2).
Parts You Will Need...
1 of M2 x 8mm self-tapping screw (AliExpress),
The existing nuts & bolts from the spool-holder,
Thread lock (this is highly recommended to prevent nuts from coming loose over time),
5.5mm spanner,
2mm hex driver / allen key.
Link to YouTube Channel... https://www.youtube.com/@FilamentAndFrugality
Video on this mod...