1 / 2
Small Vesa Kiosk Stand (75x75, 50x75)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple stand that I made for mounting an Aopen Chromebase Mini Commercial for use as a Home Assistant controller.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 0
- Views
- 110
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
A simple stand that I made for mounting an Aopen Chromebase Mini Commercial for use as a Home Assistant controller. It has 75mm x 75mm spacing for most smaller devices, but also has 50mm x 75mm holes as well—this allowed me to mount the Aopen Mini vertically while keeping it centered.
I printed in PLA. While you could probably get away with no supports, I used just a few for the screw holes and the top of the center cutout. For mounting, you'll probably need M4 screws, either 8mm or 10mm.