D-Line micro trunking couplers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
In-line and flat 90º bend connectors for D-Line 16 x 8 mm PVC trunking.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A couple of connectors for 16 x 8 mm (0.63" x 0.31") half-round PVC 'micro' trunking (raceway for US readers), as made by D-Line, and ideal for discreet cable runs. I've mimicked the groove where the branded trunking clips together for continuity of appearance.
These are 'internal' connectors, flush-fitting, rather than clipping over the top:
straight, in-line coupler
90º flat bend for right-angle direction change on a flat surface
They're small and fine, so if printing with PLA filament, I'd recommend 0.1 layer height with loads of brim and organic support with a wide first layer expansion.