1 / 5
Ultimaker 2 Extended+ Bottom Mount for MeanWell-Style Power Supply — image 1
1 / 5

Ultimaker 2 Extended+ Bottom Mount for MeanWell-Style Power Supply

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This mount allows you to attach a standard 3D printer power supply (MeanWell or similar) underneath your Ultimaker 2

Rating
0 / 5
Likes
1
Downloads
3
Makes
0
Views
21
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

Overview

This model is part of a larger project to upgrade the Ultimaker 2 Extended+.

Relocate your power supply under the bottom panel of your Ultimaker 2 Extended+ with this custom mounting bracket. Designed for standard MeanWell-style power supplies, this mod keeps your setup clean and utilizes the printer's existing mounting holes.

Model Variations

The model is provided in several variations to suit your printer's build volume and your assembly preferences.

Size Options:

  • Single-piece model: For large-format printers.

  • Two-piece (Split) model: Divided into two separate parts so it can be easily printed on a standard 220x220mm build plate. (Note: Requires 2x M3 10-12mm screws and 2x M3 nuts to screw the halves together).

Hardware Variants (for both sizes):

  • Heat-set Insert Version: Designed with 4.8mm hole diameters specifically for M3x4x5 threaded brass inserts.

  • Standard Nut Version: Designed for standard M3 nuts. (Note: There are no recessed hex slots; the surface is flat).

Hardware Requirements (BOM)

  • To mount the bracket to the printer: 5x M3 screws (minimum 12mm length)

  • To mount the power supply to the bracket: 6x M4 12mm screws

  • For the Split Model assembly (if used): 2x M3 screws (10-12mm length) and 2x M3 nuts

Tags