[MORE EMBLEMS!!!] 1/4 Scale Federal Q2B Siren [BIKE BATTERY PACK!!!]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fully functional Federal Q2B siren that can be standalone, or printed with a bike mount and battery pack (SOON)
- Rating
- 5 / 5
- Likes
- 49
- Downloads
- 503
- Makes
- 5
- Views
- 2,754
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
⚠(DISCLAIMER)⚠ MY MODELS ARE PUBLISHED UNDER THE CC BY-NC-SA 4.0 LICENSE: https://creativecommons.org/licenses/by-nc-sa/4.0/
You are welcome to download, print, share, and remix all my designs with credit, but you may not sell any of my files, prints, or remixes to make a profit. Please respect the time and effort I put into all of my designs and I will take action against them being sold for profit. Thank you!
The new smallest siren on my Printables!!
I made this Q2B because I've been getting back into biking recently and since my previous bike bell broke when I crashed a while back, I had the idea of making a bike-sized Q siren that could essentially function as a bell. That doesn't mean this siren is just for bikes, and it can also be it's own standalone model but there is a bike mount as well as a battery pack/speed controller holder (also for a bike!)
This also means that the siren is completely weatherproof! That is, if it's printed in an appropriate material like light colored PETG or ABS for example. If you intend on making this siren for outdoor use or to put on a bike, PLA is a bad choice since it will warp and melt in the sun.
PARTS LIST:
Motor: https://www.amazon.com/uxcell-x27mm-3V-12V-20000RPM-Massager/dp/B014818SPA/ref
Hardware Kit #1: https://www.amazon.com/Machine-Assorted-Stainless-Assortment-Threaded/dp/B0DFWXRM21/ref
Hardware Kit #2 (NOT NEEDED IF JUST BUILDING STANDALONE MODEL): https://www.amazon.com/Machine-Assorted-Assortment-Stainless-Threaded/dp/B0DFWYBJJJ/ref
Threaded Inserts (FOR BIKE MOUNT & BATTERY PACK): https://amazon.com/ruthex-M3-Threaded-Inserts-RX-M3x5-7/dp/B08BCRZZS3/ref
Pushbuttons (FOR BIKE BATTERY PACK): https://amazon.com/Twidec-Normal-Momentary-Pre-soldered-PBS-110-XBK/dp/B07RPS2ZY3/ref
9V Battery Connectors (FOR BIKE BATTERY PACK): https://www.amazon.com/California-JOS-Battery-PCS-Experiment/dp/B0CR8RKQ5Q/ref
ASSEMBLY:
The assembly for the mini Q is quite simple. First, you want to start off my printing the motor tolerance tool. Once it's done, take your motor and fit it into each hole going from the higher number down. Once you find the hole with the BEST press-fit (not the tightest possible, as actual rotors are usually just a bit tighter than the tolerance tool print), print the rotor corresponding to the number of the hole that fits best.
Next, you'll want to print the motor holder piece. Press the motor into the piece from the back (the tight should be pretty snug) so that the motor terminals are opposite of the little screw holes on either side. Next, print the motor back retainer and screw it onto the back of the motor cover with two long M2 screws. This is what the back should look like!

From here, the next thing you'll want to print is the stator. Now, it's important which orientation you glue it on from since you obviously want the federal emblem to be facing right side up!
Locate the four holes on the top of the stator that are for screwing on the front screen. next, locate the three holes evenly spaced out around the motor cover (near the front). You want to locate the hole out of all three that is facing right side up and evenly spaced between the two screw nubs that attach the back motor retainer. This photo should help with the alignment!

After you've glued the stator on (by rubbing super glue on the big flat piece of the motor cover and then pressing the stator through the tiny motor brim and flush against the motor cover, you've assembled the majority of the core!!
The next step is to attach the wrap-around screen that goes around the stator. It should turn out like this after being printed,

Simply just press it against the side of the stator and GENTLY weld small portions of it to the side of the stator as you wrap it around the whole thing. Once you get all the way around, LIGHTLY weld a few portions of where they connect together.

Now, you need to get the mount attached. Keep in mind, whatever mount you select CANNOT BE CHANGED!!! This is due to me not trusting plastic threads to hold on the entire head of the Q and also not having enough room for inserts. If you choose the standalone mount, attach it like this with lots of super glue and weld around the outsides.

The mount should fit very perfectly around the motor cover. Keep in mind, there's a little groove in the front of the holder to make room for the motor cover ring. You shouldn't mess this up on the normal mount but since on the bike mount there's no indication, you'll need to make sure the little groove is facing towards the chopper/stator assembly.
For the bike mount, yes I KNOW the orientations for the prints are weird but TRUST ME it's intentional. They're printed so that when the printed prints out each layer, it's the strongest possible since those parts both need to be squished/bent together in order to get a good grip on the bike handlebar. This is also why the mount is split into two sections. For that, you just need to weld them together (KEEP IN MIND THE GROOVE SHOULD BE FACING THE FRONT!!!)


Those holes in the bottom are for M3 threaded inserts. Push them up through the bottom of the stand!
Putting on the back cover is pretty self explanatory. However, if you haven't soldered wires to the motor yet, now is the time to do so! Make sure they're nice and long so you can cut them to your desired length after the assembly is finished. Print out the back cover and attach it to the motor cover by pressing it on (make sure the wires are coming out the little semi-circle hole on the bottom right where the cutout for the stand is). The back cover secures with three M2 screws that are evenly spaced on each side.
The front screen is separated into three sections. The ring, the screen, and the federal emblem. You'll notice two nubs on the backside of the ring that correspond to two grooves on each side of the screen. Put some super glue all around the inner side of the ring and press the screen onto the ring (make sure the nubs are in the grooves so the screen is properly aligned!!

Next, flip the screen to the front and super glue on the Federal emblem to the center!! Make sure it's properly aligned so it's not in a weird rotation! You should be left with a beautiful screen that looks like this :)

The screen simply attaches to the front of the Q with four small M2 bolts. Push the screen onto the stator and gently thread four bolts through each side until the screen is attached.
YOUR Q2B IS COMPLETE!!!!!

As for powering the siren, it's intended to run directly off a 9 volt battery (at least for the bike version) but if you print the standalone Q, you can run it off of ANY DC power supply you like. Just don't run it near 12 volts or you'll probably cook the motor lol
To attach to a bike (if you made the bike stand), print the bottom clamp, fit the Q around the top of the handlebar and the bottom clamp around the bottom. Thread two M3 bolts up through the bottom and into the threaded inserts on the Q stand above. Then tighten both screws back and fourth until you can't rotate the siren around the handlebar!
As for the battery pack, it's the same idea. Two M3 threaded inserts go up through the bottom clamp and into the two holes (that should have M3 inserts) in the main battery pack above. For the battery box setup, it's designed to hold a single 9V battery as well as a pushbutton and a 9V battery connector. These images below should help with assembly!


The cover just attaches with four plastic thread M2s
If you decide to print the display stand, it also has plenty of room inside for a 9V battery as well as a hole for the button. The little display plate just super-glues next to the button (you can also weld it on if you like). To attach the siren, the top cover has three bolts for M3s to go all the way through and attach with nuts on the underside. It screws onto the rest of the main box with plastic-threaded M2 bolts.