Gen 1 F150 Raptor Bump Stop replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace worn out factory Gen 1 bump stops
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 22
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Standard Digital File License
If you have an older Gen 1 Raptor your bump stops probably look like mine. I modeled some new ones in TPU as Ford wants $48 per bump stop and I like modeling.
I printed it with the mount surface up top and used 2 walls, 5% gyroid infill at a .2 layer height. This worked very well for my use case, you may need to play around with infill to get the rate you are looking for if you tow, carry heavy loads, or heavy off road.
These are not a substitute for a real air bump but if you daily and just want to get rid of the harsh impact from worn out factory bumps these will work.
To install, pry the old stops out of the mount and push these in. You may need to use a flat head screw driver to push the lip past the stops.