Tool for Sock Embroidery - Tajima, Happy & More
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tool for Sock Embroidery - Fits most Tajima-style 7" standard round hoops. Measurements in description.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Questions? Comments? Come chat with me on Discord at “Make More Stuff”, a Discord for makers/creators of all kinds. https://discord.gg/rXgZsEwaRn
Note: If you provide the proper measurements for your hoop, I can probably adjust this to fit yours. I need the hoop inner diameter, upper rim width (thickness), and hoop height (from it's tallest point).
This sock tool slides over Tajima-style 7" round hoops, with an inner hoop diameter measuring 168x171mm (horizontal x deep) that has a 5mm thick rim.
Directions:
1. Print all parts. Remove the supports from the sides of the baskets with pliers, pick out any remaining loose filament strings. Doesn't need to be super clean.
2. Choose matching basket and insert size for your sock.
3. Secure the insert to the hoop insert housing with superglue applied to the bottom slots in the hoop where the insert will rest. (Give it time to dry)
4. Turn your sock inside out, and insert basket into sock, with the bottom of the basket facing the area you want embroidered.
5. Make sure your sock is evenly aligned on the basket. Use the sock ribs as guidelines. Make sure they're perfectly straight vertically, not bunched up/distorted.
6. Slide completed housing with insert on your machine hoop. You may want to add tape to help secure it to the machine hoop, depending on how snug it is. Rest stabilizer on top.
7. Press your basket/sock onto the center of the insert firmly. The tension will keep it secure during embroidery.
8. Roll back the top of the sock around the outer edges of the basket to keep them out of the way. Make sure they're tucked down as to avoid getting caught on needles/presser feet.
9. Add topping (water soluble stabilizer, or saran wrap) for cleaner results.
10. Perform your trace and make sure you're not bumping the basket or other 3d printed parts with your presser foot. All 3d printed parts and the sock should be sitting flush with the top of the hoop. Ensure the basket is fully inserted.
11. Send it.
Designed for use on a Happy HCA, but should be compatible on any 7" Tajima-style round plastic hoop with the same measurements. The purple hoop seen in the photographs is one I've modeled/3d printed, but is identical to the standard Happy 7" round hoop.
---------------------
By downloading, printing, and using this 3D model, you agree to the following:
* Use at Your Own Risk:
You assume full responsibility and all risks associated with the printing, assembly, and use of this sock embroidery tool.
* Zero Liability:
I am not responsible or liable for any damages to your embroidery machine, needles, garments, or other property, nor for any personal injury that may result from using this design.
* No Warranties:
This model is provided "as is" without any warranties, express or implied. The final strength, accuracy, and safety of the tool depend entirely on your 3D printer, print settings, and chosen filament.
* Beware of Needle Strikes:
3D printed materials behave differently than commercial injection-molded hoops. Always manually trace your design and triple-check your clearances before running the machine. A needle strike on a 3D-printed part can shatter the plastic and potentially cause severe damage to your machine's timing or mechanical components.
---------
TO-DO:
Add clips that secure the hoop insert housing to the hoop.
Make variants of the hoop insert housing to fit different hoops and machines.