1 / 1
Painting riser / standoff - stable, easy to pick up, print many at once
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
5cm high, tri-legged riser for painting stuff. Less than 5.5g of filament per piece.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 6
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Design with three legs allows for:
Stability
Easy to grab and move
Can be put tightly together on build plate (leg of one part can be under another part - see x64 example)
5cm high, 5cm leg span. Shouldn't take more than 5.5g of PLA per piece.
Print with whatever disposable filament you have (except flexibles), default wall/infill settings shall be fine. I recommend a small brim for bed adhesion (this is not an aesthetic part - no need to remove the brim after printing)