ad5x noise reducer poop gate cutter slammer slapper damper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
reduce the loud banging clanking sound whenever its purging
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 68
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Open Community License v1.1 + General Attribution v1
use your smoothest plate
contact area is 0.2mm or 0.4mm thick, so adjust first layer to 0.2mm to print in single layer or double
rotate the model so the 1st layer print lines are aligned with the wiping direction, in my case rotated 45 degrees
(preferably doing this when its fresh printed and still warm) fold the longer tab 90 degrees to fit the side. careful when folding so it doesnt detach
pull out the poop slapper with your finger, use the gap on the model to clip to the bottom of the poop slapper
WIDER SIDE SHOULD BE INSIDE THE POOP CHAMBER
maybe some gel lube on the contact surface too I used vaseline or superlube will work too