DustLock - Woodworking Dust Collection Twist Lock Mechanism (4")
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a two-part system for 4" dust collection found on most woodworking power tools. The pieces are easy to print…
- Rating
- 5 / 5
- Likes
- 44
- Downloads
- 216
- Makes
- 0
- Views
- 1,950
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a two-part system for 4" dust collection found on most woodworking power tools. The pieces are easy to print and create a soft locking mechanism that allows you to quickly transfer from one tool to another but still get a positive attachment at each tool / station.
For many home woodworkers, there's a need to move dust collection from tool to tool depending on what is in use. There are a lot of systems that make this easy and quick, but they can be expensive. This is a simple, and I think elegant, way to make something similar.
You'll need to print:
- a Hose Side Ring and Hose Side Insert, which will be attached to the 4" flexible dust hose that is attached to your collection system using a standard hose clamp.
- as many Tool Side Rings as you need depending on the number of tools you need to connect to. (You might need one each for a tablesaw, planer, and jointer, for example). I attach these to the dust ports on the tools using #6 screws.
Printing should be pretty straightforward, note that the Hose Side Ring does require supports, but the Tool Side Ring and Hose Side Insert do not.
There are a couple of other parts I've included:
- The Tool Side Ring (2.75in) can be used with smaller dust ports on certain machines. I currently have one on my router table extension.
- The Makita LS1019L can be used for that Makita miter saw. My guess is that other Makita tools use a similar (potentially identical) size, but I can't verify that, so YMMV. This one needs supports for printing.
Print Settings
Printer Brand:
Prusa
Printer:
Mk2.5s
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.20
Infill:
20%
Filament: Any PLA Any
Notes:
Supports are ONLY needed for the Hose Side Ring.
Category: Tools